If in a ballpoint pen out of toothpaste, and long rods at hand was not, take the short splice and its extension from the part used stem, cut off from the writing site. To the working rod wrote flawlessly, its tube should be communicated with the atmosphere. Therefore, carefully wash the extension after removing it the bulb. N. RYZHOV, Ust-Kamenogorsk
Recommend to read
SCREW MOLD
Model propellers for internal combustion engines are usually made from solid wood: beech, ash, birch, hornbeam. However, work on the air screws is very labor intensive and requires a...
COMPRESSOR SPARK
Dear "modelist-Konstruktor"! In No. 9, 2004 your magazine published an article about made me the compressor on the basis of the motor-compressor from the old refrigerator. Have used it...
