In rubber boots in the cold season warm insoles my design is simply irreplaceable. They differ from the ordinary in that, first, layered; second, in covers. After the contamination covers off, wash and re-use — convenient and hygienic. In addition, it allows you to greatly extend the life of insoles.
My insoles are from an old coat. According to a cardboard pattern to cut them to size and glued in several layers under pressure with glue BF-6. Durable, warm, comfortable. Covers for insoles made from old pillowcases. Without covers insoles wear out much faster.
B. DUHNEVICH
Recommend to read
RELAY “TOUCH”
Simply by touching the sensing element and actuates an electronic device that includes an alarm or actuator. The sensing element Ан1 — plated plate connected through a resistor R2 with a...
SCREW FROM THE NAIL
Homebrew joke about the fact that the screw hammered by a hammer holds better than a nail wrapped with a screwdriver, I remembered in that moment, when it took a fairly long screw M6,...
