Confident fill the tank with a narrow neck to the desired level (for example, an automotive canister), if you equip the funnel with a special gauge. For its production will need a wire needle with a diameter of 1 mm, cork or foam float and a tin strip into the guide hole.
Recommend to read
RESTORING THE NOZZLE
The reasons of breakage of the nozzle on the Microdrive, a great many. And to do so more quickly, a new chiseled mikrodetal is not always possible. But, it turns out, engaged in the...
Disassembly with a magnet
When dismantling microcircuits, the leads that have been bitten off from them and remain in the board are usually removed using a soldering iron and tweezers. In this case, due to...
