![MICROPOLITAN](https://modelist-konstruktor.com/img/6613/1.jpg)
When installing the propeller on the crankshaft of the engine of the snowmobile of space to accommodate the exhaust pipes and mufflers. And without the exhaust system of a two-stroke engine is not only more noise, but also consumes more fuel. However, its substitute a simple engine-IZH can serve steel cups Ø 45 mm and a length of 65mm, mounted on the cylinder collar nuts of the exhaust pipes. The required resistance of the exhaust gases have 16 holes Ø 5 mm, rosemere drilled around the circumference near the bottom of the “mufflers”.
S. CHEKMAREV, Krasnoyarsk
Recommend to read
GRINDING HEAD
I want to tell you about how I make grinding head to work with a drill. They not just helped when I had to counterbore some hole or to "improve" a remote place. So, take a chip...
NON-MOTORIZED RECORD
Glider-soaring leader A-15 created by the design team, headed by the General designer, Antonov ASTC, in 1959 and was designed with the latest achievements of gliding in the USSR and...