To various wall mounted devices for tool storage, add two more. The first metal (for example dural) channel. One of his ass he attached to the wall; the other Windows are cut into sawn in the wall of the channel gap. It is a kind of hanger for various plumbing or carpentry tool. A similar Read more…
There’s an operation the painters and decorators — “recapture stencils”. Professionals have for this special end of the brush. I had to come up with your own. Cost strips sheet and a foam sponge, as is clear from Fig. And I assure you of trafaretka put — do not count. The paint hasn’t dropped and Read more…
A lot of interesting and useful find in the magazine. In response to your appeal to be not only a reader but also an author, send two of the Council. For several years I use a very handy screwdriver to work in tight spaces. Like was suggested with the magnet, and rubber bands, and tubes, Read more…
Insurance against burning out the heating element wikipesija the kettle samovar coffee pot or offer to make an extension cord with auxiliary power outlet and timer from the washing machine; thanks to him the forgotten appliance is automatically disconnected. N. ROZANOV
All good large bench vise, but where to install them at home! You are not going to spoil the table even if it is working… However, you can attach a vise to a separate wooden panel, and with it set on the table, holding clamps. And if you are irritated by the inevitable “ticking” of Read more…
Even a disposable syringe can still be of use, and more than once — of course, for other purposes. For example, the packing case of needle incised along the axis, it is suitable for use as plastic plugs inserted into the hole in the wall. Screwed it in the screw provides the der is not Read more…
If the epoxy, pour it into a small container, place the bolt or screw, after curing of the resin poluchitsa ready nut. It is only necessary to pre-coat the threaded surface of any liquid lubricant. And to improve durability in an epoxy resin to introduce a filler, for example, aluminum powder. This method is convenient Read more…
Depending on the desired size of the scoop for the bulk materials (cement, sand) pick up a tin can and cut the second bottom using the tin snips give the workpiece shown in the form. It is desirable that the height of the banks was twice the size of its diameter — then the scoop Read more…
One of the photographers is not lost the plastic cover from camera lens? Apparently, so many foreign firms provide on caps camera special ledge, knitted lace with the body of the device. However, this solution albeit not much, but increases the dimensions of both the camera and the case. Leskov’s Lefty mechanical overseas flea has Read more…
If the lattice bike rack seems not very convenient, to make him removable seat made from thick cut plywood or particleboard. It is mounted on the bottom decks.
