When a bike will travel thousands of kilometers and the spokes on the wheels spabot, tighten them — not an easy task: rust and dirt do the job just unbearable. Offer a simple way to without any problems to adjust the tension of the spokes. This will require a transformer (250 watts, 220/12), the wire and carbon rod from the battery. Combining all the elements as shown in the diagram, the supplied carbon rod to the head of the spokes and, dropping on her “avtol”, freely turns the head in the right direction.
Recommend to read
DESKTOP MINIATURE
In the manufacture of printed circuit boards have to drill a lot of holes. This is best done on a drill press. But many radio Amateurs it is? But it is not so difficult to do. My...
“SOFT” CLUTCH
To connect the motor shaft with the driven shaft in the mechanism is never easy. For example, electromotor and water pump also require accommodation on a single rigid frame, which would...
