When you need to pour the liquid in a bottle with a narrow neck, you always use the old reliable and proven method: inserted into the hole daddy or thin wire of a suitable diameter so as not to touch the walls. The liquid in this “vortex” flows gently and smoothly.
Y. BOGOYAVLENSKIY, Kazan
Recommend to read
ABOUT VANT-POTENSAC AGAIN
In the manufacture of sailboats on a small scale a lot of work goes into the production of the most likely guys-putenkov. A method of simplified simulate these parts and nosing integral...
BRUSH SECRET
If inside an ordinary Popova brush glue flush with the bristle plate of hard rubber, it can not only sweep, but wash the floor: remember car wiper, where the rubber brush dry wipe the...
