There is no need to secure the dowel in the hole in the wall, screwed it in the screw firmly rasclient it there. Is it possible to use this principle in the connection of wooden parts using wooden studs? It turns out that you can. For this spike it is necessary to saw through the small longitudinal groove and insert a narrow wedge — pointed metal or wooden plate. When driving such a spike in a blind hole mating parts wedge, resting at the bottom, firmly lock the spike, so that the adhesive is not required.
Recommend to read
LADDER CLAW HAMMER
There is nothing easier operation with a claw hammer. However, it is desirable to have a nail not to bend, pulling. Especially if it is longer than 60 mm. Usually put under the nailing...
FROM BANKS TO BANK
Nice to work in a shop where every tool has its place. But sometimes tan: it took some trifle — bolt, nut, washer, and began the "raskopki" banks with fasteners. Well, if an eye and...
