Wrong strike with a heavy hammer can cause serious injury to the hand holding the chisel. Yes, and a hell of a kick in the arm unpleasant. This work will facilitate and protect a simple removable handle (see Fig.), bent from steel strip and fixed at the top of the tool with the bolt-ladder. It will not only take your arm back to the safe zone, but will act as a spring, absorbing impact from bumps.
Recommend to read
THE ELECTRICAL TERMINAL IS A FORMER TUBE
In Amateur practice it sometimes becomes necessary to connect to the layout of the electronic device or the measuring device of the connecting wires. Most convenient to do this using...
THE DIAMETER OF THE LINE…
To know the exact diameter of the wire will fail, and no micrometer or Vernier caliper, if you use ... normal range. This is quite tightly wound on the rod a small number of turns of wire,...
