WICKET — A DIFFICULT

THE WICKET IS NOT EASYThe gap exposed between the gate and the column will cause respect for the skill of the Builder from any incoming to the site. To do it by using two identical plate thickness-supak strubin and wooden planks.

Recommend to read

  • DRYING WATER…DRYING WATER…
    In this issue we introduce young innovators, participants of operation "the Introduction" with an unusual method of drying developed in Nikolaev. At our request about it, say the authors...
  • MEASURES THE BOLT…MEASURES THE BOLT…
    To permit sheet metal, need metal shears and a line with the Scriber for drawing cut lines. And if you can see the curved workpiece? Use the bolt or stud of suitable length, as shown in...