The name given to the original device, designed to replace manual labor when laying trunk cables with a diameter up to 60 mm. With their heavy lashes, as if boatmen twine could handle, holding at the same time, only a few people. Hard work and assumes “Electrobolt”.
Despite its small size — a little more than a telephone device develops a traction force of up to 75 kg. This is achieved thanks to four about£resideny rollers driven in rotation embedded within the housing by an electric motor.
“Electromures”:
1 — cable, 2 — “pull” rollers, 3 — casing with electric motor, 4 — bearing, 5 — universal remote control.
“Electromures” can stretch to 10 m of cable. In effect the device is the remote control the remote control.
Recommend to read
ON-BOARD NETWORK UNDER CONTROL
I offer a homemade device allows you to control voltage vehicle electrical system. In particular, that's all right — the battery is charged and generates the required 12-14,8 V, the signal...
ASPIRIN FOR NICHROME
For soldering nichrome, the guides recommend a special activated fluxes TRL-1 or TRL-120. Not all are available. Where to find a replacement? Suggest: in the home medicine Cabinet. Check...
