GRINDER PLUS DRILL

GRINDER PLUS A DRILLAny rural housewife knows how much time and effort to prepare to feed livestock and poultry a sufficient amount of chopped herbs and vegetables or miss berries for canning with sugar. A simple device will greatly facilitate this work. It is sufficient to connect the grinder with the drill, and within 20-30 minutes it will be chopped about 50 kg of greens.

Fixture design is simple. It is based on the bracket, weld, or the entire cut of steel sheet thickness 4-5 mm. In its vertical stand is drilled 014 mm hole for anchoring the drill. Distance N depends on the size of grinder. The drill and grinder are joined together by a screw (with a severed head), threaded naturally corresponding internal thread in the tail of the auger of the grinder. The screw is tightened the locknut, and the other end is clamped in an electric drill Chuck.
CHOPPER PLUS ДРЕЛЬ2
 
It is desirable to use a power drill with adjustable speed.
 
According to the magazine
“Guide yourself” (Bulgaria)

Recommend to read

  • THE COVER ON THE CHAIRTHE COVER ON THE CHAIR
    The problem is small but not invented, and most importantly - serious. The negative influence of draughts on human health obviously, and there was low back pain, and sciatica, and...
  • UNIVERSAL WORKBENCHUNIVERSAL WORKBENCH
    The proposed transformable workbench can be used not only at home but also in workshops, at stations of young technicians; "fit" it in the garage. The base of the workbench is a...