The sleigh is, of course, perfect! But what to do with baby clothes when the child returned from the street after riding on all these sleds? Dry, you say, and you’re right. But the question is, how?
To simplify this procedure everyone can. Make the dryer. By the way, in addition to the main purpose — to dry things, it will serve as a stand for flowers (after all the window sills in modern apartments so narrow!), and at the same time be decorative grille water heating.
For the manufacture of the dryer you will need three boards with a thickness of about 20 mm and a few oak or beech slats with section 20X30 mm. the Design is quite clear from the drawings. It is only necessary to mention that on top frame is tensioned nylon cord — it is used for hanging small items. Framing the front panel of the dryer will be sleeker, if you’ll make it out of the same cord or zadekorirovat furniture fabric in the colour of the window curtains.
Top and side panels upholstered in film “under the tree” or foniruyutsya, and the front is covered with a colourless varnish.
For fixing the front panel will suit any furniture lock or magnetic latch.
Recommend to read
GARDEN TABLE
Two plastic pails, metal tube, sheet particle Board or boards required for the manufacture of a simple table for a garden plot. To the table is not overturned, the bottom of the bucket...
“WARDROBE” UNDER THE BATH
As a rule, the bath in our homes or closed with boards or bricks, followed by finishing the tile or under it is a cupboard with sliding doors, in which you can store a variety of things....
