Cut the ribbon at the ceremonial opening of the Central exhibition NTTM-80 at ENEA USSR — a kind of finish of the third, final stage of all-Union review of scientific and technical creativity of youth, which was dedicated to the 110th anniversary of Lenin’s birth. In the halls of 20 thousand exhibits in the country — 20 million boys and girls, young innovators, making a creative contribution to the acceleration of scientific and technical progress. During the four years of the tenth five year plan participants NTTM various sectors of the economy developed more than 4 million rationalization proposals, inventions, giving a saving of over RUB 5 billion.WITH AN EYE ON QUALITY
Cut the ribbon at the ceremonial opening of the Central exhibition NTTM-80 at ENEA USSR — a kind of finish of the third, final stage of all-Union review of scientific and technical creativity of youth, which was dedicated to the 110th anniversary of Lenin’s birth. In the halls of 20 thousand exhibits in the country — 20 million boys and girls, young innovators, making a creative contribution to the acceleration of scientific and technical progress. During the four years of the tenth five year plan participants NTTM various sectors of the economy developed more than 4 million rationalization proposals, inventions, giving a saving of over RUB 5 billion.
Since childhood read “modelist-Konstruktor” — he learned a lot of interesting technical ideas and developments. According to publications in the journal while still in school, redid the bike in the sled on the tires, and then with a crawler gear. During the construction of the manor house has designed a variety of tools and mechanisms to facilitate construction. And now with great pleasure engaged in technical creativity. Today, mainly from units and units decommissioned or abandoned equipment, collected four tractors, which offers its readers.
To transport various cargoes to their farm of Simonov from the village of Podsosenki Saratov region made the tractor chassis. The engine capacity of 40 HP with gearbox’s used car “Zaporozhets”. The transmission complements the wheel gearboxes from a Bulgarian truck. The frame is welded from channel No. 12. Front axle is a shortened rear axle from the car UAZ-469 with the wheels (they brake and steer). Rear wheels — of the truck GAZ-66. Payload chassis — 1T transport speed is 45 km/h. fuel Consumption is about 6 liters per hour.
General interest competitions rakatomalala (the first open championship of Asia and championship of Russia) resulted in a model of Rotorua (class Ѕ9А) Russian athlete Vladimir Menshikov. Will talk about it in detail. This model is schematically recall the development of the first of rotochutes (1994 — 1996) at the dawn of this category. It was then suggested that a similar version V. Menshikov. But the current model is at a higher technical level. It does not apply to the type of rotochutes container type. The body of the model consists of four blades made from balsa plates with a thickness of 1 mm. folded along the axis of the model, each blade, or rather its width (chord), is 1/4 of the circumference of a circle with a diameter of 40 mm.
To check the symmetry of the punch of a model of the ship on the drawing manufactures all of its frames (or polosamote). Although this work is easy, but requires time and material cost. For ship modeling clubs and laboratories, which launched production models of ships of various classes, I suggest using a universal mechanical pattern. It reliably and quickly provides control of compliance with the hull lines of the model of the vessel its theoretical drawing and defines even the most minor asymmetry to each side of the punch.