Mittens and… old boot – a “dress” for the ladder will protect from the two possible ills from its use. First, will not suffer a Wallpaper or painted surface of the walls from inevitable scratches; the second staircase with this bottom support will never slide even on hardwood or ceramic floor.
I want to share with a favorite magazine his small development.
We had a bad, nasty apartment call: rough and very loud. We always flinched when anyone came, and those who called for the first time, too frightened. Although the call was prefabricated, bought – and hung up.
But the patience has snapped, and I decided to remake this “Intimidator” that signaled a more pleasant and peaceful.
The ancient Romans learned how to make the jelly by heating and then cooling the fruit-sugar mixture, and this method is used to make jams and jellies so far. The laurels of invention of modern jelly attributed to the Scots. In their country was opened the first marmalade factory in 1797.
Today produce jelly candies with the taste of juicy fruits and berries, as well as healthy and delicious mousses. Gourmets will appreciate the taste is soft and delicate jelly with sour.
This model is very popular among French children: because making it requires merely a sheet of drawing paper with a size of 20X24 cm, divided into centimeter squares. The Central squares (see Fig.) bisect.
Well in our time is no less important than before, especially given the popularity of cottage construction. No tap water, even filtered through modern filters can’t compare to well.
By its usefulness, well deserves to be the visible part of not just served a protective function, but also a decoration, served as a decorative design element of the site. For those who have your well, recommend the equipment of its ground part is not limited to a simple visor with a lid, and decorate a visor, for example, as shown in the photo. Pictured here the roof superstructure will be suitable for the existing well, and can serve and just his idea, a beautiful part of the area, if you are unable to acccess well.
Many rural Amateur designers rightly considered the most promising motoliberty tillage unit. However, it is not without drawbacks. And chief among them is the need every time to drag a heavy plow from the end of the furrow to the beginning, at the same time shifting the very motoliberty a distance equal Majboroda. The fact that in this case the power unit and tillers separated.
We present a prototype of the amphibious machine is a device hovercraft (Ohr) under the name “Aerodzhip”, publication of which was in the journal “modelist-Konstruktor” No. 7 for 2007. Like the previous machine, the new machine – a single-engine, single-rotor with distributed air flow. This model is also triple, with the location of the pilot and passengers at the T-scheme: pilot middle front, and passengers – on the sides, back. Although there is nothing stopping the fourth passenger to sit behind the driver – seat length and power rotor setup is enough.
My good friend since high school, enthusiastically collected stamps, matchbox labels, pocket calendars. Now his collection continues to children, and himself, he left only one passion: icons. And store came up with the original book, which makes itself as their collection. Material for their production is either thin cardboard or even paper.
Every time the whole family going on vacation, my task is to check the status of our bikes. As a rule, all the nodes are in order except for the tyres: they require periodic pumping. Here is sometimes hard, and much time is spent on it.
It was necessary to invent a device that would replace the pump. Its main components were borrowed from me… homemade siphon for aerating the water. The operation of the device is very simple. Carbon dioxide gets inside, it evaporates, creating a pressure that the tires necessary.
During the construction of the models is often necessary to apply a veneer of varying thickness. Typically the desired thickness is obtained by grinding with fungus with glued on end cloth, is inserted in the Chuck of the drilling machine. This method is most affordable, but it has several drawbacks: poor performance, inability to process veneer with thickness less than 0.5 mm, because of the rotation of the fungus veneer escapes from the hands and broken, and finally, the main drawback is the large air pollution wood dust. To handle more than three or four plates is not possible even a respirator.
