Design truck for paraglider was preceded by just the fascination of paragliding, which did not come at once. First flew airplanes (and flight certificate), gliders. But one day, fly a paraglider, got into it seriously. I think it is comparable to swimming to sailing. Only even better.
First, like most parable-Aristov, used for takeoff and landing conventional three-wheeled cart. Not going to say much about all her faults (they are known to the pilots para-glider). But the most unpleasant of them tipping forward and sideways with insufficient management skills dome on takeoff and landing. But for experienced paraglider on a truck is not immune from stalling—for example, when a side gust of wind. And this is very dangerous because the rollover more likely, the higher the speed, i.e. during takeoff and especially during landing.
Around the Earth discovered belt of antimatter.
For this development the company JD Europe Components GmbH received the gold medal of the Eurobike Award 2011
Found technological method of producing nanofibers.
Amateurs homemade flower is always a problem: who will water the flowers when it’s vacation or leaving the country?
Sales occurring in the pencil with eraser on the end is very convenient: it is always possible to erase an inaccurate line or bar.
Fluorescent lamp — gas discharge light source in which visible light is emitted mainly by the phosphor, which, in turn, glows under the ultraviolet radiation of the discharge; the discharge also emits visible light, but to a much lesser extent. Luminous efficacy of a fluorescent lamp is several times greater than incandescent lamps of similar power. The lifetime of fluorescent lamps can exceed 20 times the life of incandescent lamps while ensuring sufficient quality of power supply, ballast, and compliance with restrictions on the number of on / off.
Some time ago folding blades supplied by industry mainly for the army. Now widely available and are popular with motorists and hunters, geologists and fishermen, campers and even gardeners. This is understandable: compact tool regardless of the design, convenient for transportation and storage.
Frame double machine, dubbed “mouse”, welded from thin steel tubes. Front axle (Fig. 3) assembled from beams, two eyes and swing units of the front wheels. Axle are the axle adapted to pivot the sleeve at an angle of 98 ° and welded to it. Pivot arm has a bend of sheet steel with thickness 1.5 mm; pivot bushing it is attached by welding at an angle of 110°. Ring tail joints at the ends of the swivel levers are cut from steel pipe ø 12 mm.