In Amateur practice when developing or establishing a device is often required to connect to it a certain load and still it is necessary to measure its output parameters. This scheme allows you to connect your device to one of 22 different loads the Connection of a load is either a permutation of the jumper plug into the corresponding socket, or by using two app switches the type of the EGP on 12 position Device P1 allows you to control the load voltage in three ranges to increase the accuracy of the measurement Device P2 monitors the current flowing through the load Resistors is desirable to have a capacity of at least 10 watts, C5-16, etc.
Read more
The proposed indicator allows you to capture voltage of 6 — 12V (i.e., below the ignition of the neon lamp) and above. In contrast to the known similar kind of indicators, there are no buttons and limit switches measured values, which a wrong selection can lead to distortion of information, and even to failure of the device.
About ten years ago I read in “M-To” article that described the design of the spear gun. Decided using the same principle — a spring as a battery, to make the gun more simple, easy, and good combat. Numerous experiments and fine-tuning have produced the desired result.
Difficult one, without an assistant, remove the rear wheel with a rather telogo scooter “Tourist”. All this has forced me to make arrangement — additional support with screw lift: it allows you to quickly, effortlessly and, most importantly, unassisted to dismantle the rear wheel.
(Four steps to excellence). 1.
Photoswitch is a widespread element in various automatic systems, protective devices, meters, etc. depending on the tasks the system is triggered by a photocell can be made instantly (for example, the turnstile in the subway), or via a predetermined gap (the Elevator doors). And in some cases rapid changes in illumination is necessary to analyze the situation and prevent deployment if it turns out to be false.
A good host in the winter and enough work in the garden. One day, when the snow piled very much, it was necessary to compact around trees, and roofs of the buildings do not interfere with cleaning. So I went on “zaporozhtse 966В” to see his “estate”. Well in the winter in nature, but deserted. The house has electricity, furnace fun crackling wood, warm and cozy. Having stayed at the site for two days, I decided the next day early in the morning, while cars on the road a little, to go home. In the morning I sat behind the wheel of his “foreign cars”, and the engine will not start battery is dead. And there’s no one around. Neither “light” nor “pull” there is no one to get between the necessary.
In selling there are a number of relatively inexpensive electronic musical instruments (EMI) of Chinese origin that fall within the price category of a toy. However, inherent in their electronics capabilities can reach far enough beyond the “toy”, and the user is often not specified. So, I purchased keyboards AMY SK-4901 (33.e.) the in which includes rhythm programming by the user (it is relatively expensive and quite complex polyphonic child of AMY) TO the user about its capabilities is presented sparingly enough, and in this article provides add-ons to it.
Depicted in the drawing bath is designed for apartments where there are no special facilities. “Hiding” it in a wooden Cabinet, made according to the dimensions of the bath. The box itself is assembled from particle Board with a thickness of about 20 mm, on the outside it is coated with synthetic film “under the tree” and inside: “tile” with tiles.