BY THE WAY ABOUT THE EPOXY

BY THE WAY ABOUT THE EPOXYThere was a time when a cracked handle of radio, split arm shift lever of the car has forced me to look for a replacement in the stores, and, frankly, often unsuccessfully. I tried to carve them out of various plastics or metal, but this was laborious and time consuming. In addition, not always possible to bring the home up to full compliance with the lost original.

Read more

… WILL UNBALANCE

The quality of mortar depends largely on the quality of sand: it is necessary to sift carefully to avoid patches of clay, coarse particles, stones. To facilitate this work will help here’s a simple mechanization. To the sieve, suspended by springs, is attached to the electric motor, the shaft is mounted an eccentric weight: when Read more…

CUTTER FROM DOWELS

For cutting the stencils required knife cutter. It can be made from construction nails (dowels). The handle bar drilled the hole 0.5 mm smaller than the diameter of the dowel and with a depth of half its length. Trying to drive the dowel into the hole and the free end give a necessary cutting shape.