Original brush two foam rollers used for painting walls and ceilings V. Vakulenko from St. Petersburg. They are located on the shaft so that rotates in contact with each other, the lower roller partially submerged in suspended on its axis cuvette paint. Revolving, it does not apply to the painted surface and “feeds” the paint top roller evenly and accurately. This arrangement is particularly useful when painting the ceiling, and in this case you can do one roller, as shown in the figure.
Recommend to read
RADIOSONIC CONTROLS THE PUMP
The creation of remote electronic devices control various actuators were promising direction in the radio even during my "pioneer" childhood in the 1980-ies. Then, under the guidance of...
WITH NEEDLE AND RESIN
"Sunwski" — small boats that make the guys on "Pioneers yard" of the city of Astrakhan on well-proven technology. The main principle consists in wrapping the frame with fiberglass...
