
In the case when you need wooden circle perfect quality to produce such, without special tools is difficult. Here will not rescue the diligent filing of the workpiece in the usual hacksaw; and even the use of a jigsaw will not be able to guarantee the desired purity of the edge of the disc: his brush with all the ability to “cut” roughly. To get out of a difficult situation will help original device recommended by the Hungarian magazine “Earmaster” self-made from scrap materials.

There is probably not one family that would not receive greeting cards. Over time they accumulate quite a lot, and most of them are usually thrown away. Meanwhile, postcards, due to their rigidity, can be used for making toys, interesting and useful to young children. Here are some of them.
Typically, for those, who acquires a country house, furnishing it is not an issue: if it is not possible to buy special furniture — trucks bringing in outdated city. But, oddly enough, the usual city apartment, this furniture looks alien, a stranger in a non-urban environment, does not harmonize with wooden floors, a stove or a fireplace and wooden walls. However, a small upgrade in the design of the furniture make it more suitable to this new environment. The original version of changing the appearance of familiar furniture offers Hungarian magazine “Earmaster hobby.”
Chair thanks to its “mobility” and flexibility, beyond doubt, an important and interesting part of interior living room. Several chairs can make a variety of ensembles. They can be placed one by one around the low table to move in a row along the wall, forming a kind of sofa, you can fill them and the corner of the room.
It is believed that the atmosphere in the interior of the home, it is desirable from time to time to change — to maintain the psychological effect of novelty and revitalizing sensations of comfort and freshness of decoration. However, it is not necessary to spend money on new set — quite nice to rearrange individual items of the already existing, and the result will be achieved no less.


In technical circles often there is a need for a wooden workpiece, having a flat, smooth surface. To ground the Board easy manual processing is laborious and requires specific skills. The machine, designed in the laboratory, missile and space simulation CSUT of the Kazakh SSR, allows to mechanize the grinding of wooden parts. The design of the machine is clear from the figure. Used to the drive motor of the brand AOL-21-4 power of 0.27 watts at 1400 rpm, but you can use any other motor with similar characteristics.
Blades from the safety razor is often used as a kind of microcycle. But keep them in the hands uncomfortable and unsafe. Holder, shown in the figure, will significantly simplify the business. The handle can be made of aluminum tube with a diameter of about 12 mm. One of its ends flattened and bent at a comfortable work angle. It bent the end of prikladyvaya steel plate, which split three threaded holes M3. Wrapped in two outer screws, and their heads serve as guides when installing the blade.
There comes a time when you suddenly notice. your wooden floors in the rooms or in the room begin to creak or appear defects such as swelling; the sagging, rotting. You begin to understand that no repair is necessary. The faults of the sexes, few who can avoid. In the palaces of nobles and kings Park! preserved to our time by Goy simple reason that the master was threatened with physical punishment for poor performance. Modern builders. unfortunately, often allow the marriage. Especially this sin of the so-called special master, abusing the fact that then they are almost impossible to find to draw to Troubleshooting. Relentless time on the floors, too, has its devastating effects.