When you work with a rake with a handle of the same diameter throughout the length of the last slip in your hands. To prevent this from happening, you have more to compress the toes, which get tired very quickly. The solution is to replace the stalk on the other, with a gradual thickening up. But this can be found not always.
Meanwhile, to facilitate the work, enough to pick up two rings (aluminum, plastic, etc.). Pritupov their outer edges and wearing on a cylindrical stalk, fasten one ring in the middle and the other at the end of one or two countersunk screws through the corresponding holes in the rings. Work with a rake so you can handle effortlessly.
A. KOLOMEYTSEV, Chelyabinsk -70
Recommend to read
ERASER IN THE CAP
Sales occurring in the pencil with eraser on the end is very convenient: it is always possible to erase an inaccurate line or bar. However, to make such a pencil, if you use the...
NOT THE CLAMP, AND PIN
For rallying and compression with wooden sticks or planks when gluing, use special clamps carpentry. However, in the absence of them are just a long threaded stud with a couple of nuts...
