how it works like this, and a good host you will not regret the five minutes to produce such a device. At the depot you can put any thick-walled bottle. You will also need the rubber tube and a metal or glass tube of length 10— 12 cm and an inner diameter of about 3 mm. Fill with water a vessel to about half and stir in the soda at the rate of 4 teaspoons per Cup. Before you plug the bottle with a rubber stopper with her passed through the tube, hang it on the inside string pouch with citric acid so that it does not touch the water. The fire extinguisher ready. You are armed against micropora. Is to turn the vessel, as, from the tube will begin to break the foam jet of water.
Recommend to read
FROM WRIST – TABLE
If you have watches that are not used, are very simple to make table. For this you need to cut from sheet metal strip, bent ,and not wearing her watch.
A VERY OLD FRIEND
City bus ZIL-158. In the postwar years for urban transportation used mainly the bus ZIS-155, which was produced from 1949 to 1957. But in the mid fifties it became clear that these...
