Original country hanger hallway can be made of thick enough gorbylej Board. The bark it is necessary to remove carefully – you don’t need to be surface sanded. With convex sides to carry a few blind holes (cavities) under the hooks approximately 2/3 of the thickness of the slab. Nests we need to make oval or rectangular in cross-section (round hooks can rotate). They insert respectively the processed ends of the branches of a suitable length. To fix the hook screw with washer. To hanger not to warp the displacement of the center of gravity to attach it to the wall it is necessary not less than two places. As a finishing coat hanger to cover with varnish. NIKOLAEV
Recommend to read
HIKING “THE KID”
Radio, about which we tell, collected under the scheme direct gain works in long ranges (2000 — 740 m or 150 — 400 kHz) and medium (200 — 550 m or 520 — 1600 kHz) waves. Despite its...
HE DOESN’T NEED WINGS
The history of creating our autogyro, later named DAS-2M, spans over two decades. The first flight of the DAS autogyro took place in May 1980 in an unpowered version, towed by a "Zhiguli"...
