“Bespectacled” they know that most victims are not glass and frame: breaks down on the bridge of his nose, bursts into tight spots. If no spare points, you can use a simple Express repair. Take a thin paper clip and pliers to bend the little brackets. Taking the tweezers, heat the clip over a flame and allowing to cool, gently press the ends into the frame on both sides of the crack. If the bracket included will not completely push her soldering tip, again she will be warm and will easily sink into the plastic.
“Bespectacled” they know that most victims are not glass and frame: breaks down on the bridge of his nose, bursts into tight spots. If no spare points, you can use a simple Express repair. Take a thin paper clip and pliers to bend the little brackets. Taking the tweezers, heat the clip over a flame and allowing to cool, gently press the ends into the frame on both sides of the crack. If the bracket included will not completely push her soldering tip, again she will be warm and will easily sink into the plastic.
“Bespectacled” they know that most victims are not glass and frame: breaks down on the bridge of his nose, bursts into tight spots. If no spare points, you can use a simple Express repair or boutique optics. Take a thin paper clip and pliers to bend the little brackets. Taking the tweezers, heat the clip over a flame and allowing to cool, gently press the ends into the frame on both sides of the crack. If the bracket included will not completely push her soldering tip, again she will be warm and will easily sink into the plastic.
Noticed mistape? Highlight it and press Ctrl+Enter, to inform us.
Recommend to read
SOLDERING UNDER A MAGNIFYING GLASS
Anyone who ever worked Uborki or repair of electronic devices knows how the success of the quality and precision soldering. Great benefits this can bring the use of simple devices...
CLIP — FIVE MINUTES
If you need kremowy clip, that you can make in literally five minutes. First of all, taking the cap from any tube — of cream or toothpaste and nut. Put the cap on the table screw hole up...