The sound of water filling the toilet cistern, many are trying to reduce by means of rubber tubing, put on the fitting of the float valve. However, to significantly reduce noise, this measure does not help. Much more effective silencer made from a piece of foam — cubes with the size 30x30x150 mm. It is pierced through (e.g. with a power screwdriver or tube), incision at one end and is attached to the fitting, as shown in the figure using twine or soft wire.
I. GALKIN
Recommend to read
CUTTER FROM DOWELS
For cutting the stencils required knife cutter. It can be made from construction nails (dowels). The handle bar drilled the hole 0.5 mm smaller than the diameter of the dowel and with a...
WICKERWORK IN RUSSIA
The oldest crafts - weaving - has always been honored in Russia. And was put on the importance often above all else. Even mentioned: "It pletenica about the gold pure." And why not just...
