It so happens that a nail head or screw head, connecting the two wooden parts, you want to hide, to conceal. Here’s one way. Will atsaite chisel a thin layer — literally chips of wood (but not completely) in the place where you want to drive a nail, and hammer it. Then put glue and glue chips into place. The nail head will completely disappear.
Recommend to read
THE PROTRACTOR ON THE MACHINE
When machining on milling machines it is frequently necessary to install the item at a certain angle. An original device for this purpose was shown in NTTM-78 military innovators. This...
SPEEDWAY IN THE GYM
For the manufacture of tracks required plywood thickness of 10 mm, and it is important that it was dry, smooth, uniform thickness and without lagging layers. Each sheet should have the...
