That is: a knife. And everyone is familiar — an ordinary household, which we used to open canned food. We just never thought that it can be applied in other cases — for example, to cut sheet metal in the repair of the roof, cut part of the metal cans, any pipe made of tin — just as we do with canned food. Cut edges are then beat with a hammer to align.
Noticed mistape? Highlight it and press Ctrl+Enter, to inform us.
Recommend to read
- THE WING — NO PROBLEM
Compared to any other nut, wing is much easier to use: tighten and loosen easily by hand even the old, "stuck". But you can make the wing bolt! Here is a way of turning any bolts in the...
- PLUG IN A HURRY
Often in the manufacture or repair of furniture made of particleboard require dowels of circular cross section. Manually with a knife to whittle them long, and the diameter of turns of...