Good recommendations

If old tooth brush a sharp knife to cut the bristles to drill in this place two holes for the mounting screws, and the handle, holding it over the steam, bend the arc, you will have elegant and quite durable wall hook.

Often Amateur radio operators required to shorten ferrite round rod, familiar to many of the built-in antenna handheld radio. But this material is difficult to machine. Dealing with it will succeed, if you put the rod in the Chuck of a drill and to bring to him with a certain force glass cutter: ferrite break Read more…

Lee leaves baby stroller out of the house (where now find entrance without stairs?), overcome whether the underpass is on the platform of the station or stations everywhere have to overcome the steps. And most strollers, unfortunately, do not even have carrying handles together. Set on the edge of the bottoms that’s a pen — Read more…

Any canister is closed screw cap or stopper, and means to pour the contents out of it, you will have to Unscrew or remove the tube. With the capacity shown in the picture will not have because her tube is still mounted and crane.

I bought a plastic baby bath. Comfortable, beautiful, but where is her store! Decided it was better just to hang on the wall in the bathroom horizontally. This is enough for two brackets, hooks, bent over the steam from strips of thick plexiglass. They are attached to the wall with screws in a line at Read more…

In joinery and carpentry, we often need to inflict a series of neat parallel lines on the workpiece material, for example, when cutting plywood marking wide boards and tai on. For this there is, of course, a special tool. However, if such devices at hand was not, help out… clamp. Hold it line and proceed Read more…

Many umbrellas of the spoke ends plastic ferrules, to which the threads are attached to the edge of the fabric dome. When threads are ground, loosely fitted tips lost, and the proper tension of the dome does not work. To replace the loss possible, turning down the end of the spokes with the pliers in Read more…

If you will need a soldering iron with a fine tip, navate on the rod of a powerful soldering iron a few turns of copper wire and bend its end perpendicular to the main sting. Sharpen it, solder, and you have in your hands a new tool.

If you are caught in the woods or on the river Bank or a branch broken off a bough, at which time the core is turned into dust, but the outer layers still strong — saw the discovery of a number of rings, where you want to locate a good sand paper and cover the Read more…

Everyone who was engaged in the sanding of new floors, door Polota and other surfaces of non-metallic materials, knows that abrasive skin quickly become clogged with wood dust, paint and putty. Even worse, if you want to wetting by water, and on hand — just paper skin. I made and checked to work rather unusual Read more…