It is not easy to connect two steel cord or to do at the end of the loop so that the seal can withstand a maximum load available for the cord. Nodes tend to bloom; no more reliable and crimping the metal tube. Offer a simple reliable bolt clamp. Its structure is clear from the figure. Approximate dimensions for steel cable Ø 3 mm: plates — 30Х10Х2 mm; bolts — M4.
G. PIVO, Akhtubinsk, Astrakhan region.
Recommend to read
- RACK HEADSETS
In our small apartments recently settled a combined sectional and furniture. And — please note! — the more expensive and better quality headsets, the less it pseudotolerance, pasted... - DRIVE ON THE “CIRCULAR SAW”
On a circular Pipa can not only dissolve a wooden Board in straight lines, but cut discs of any diameter from sheet material. For this you need only do a simple device-a plywood plate,...