To cut sandpaper with scissors should not be as abrasive material will quickly dull the tool. I suggest doing it with a knife. Need to put sandpaper abrasive layer down, and on its back side to scratch a line with a knife. This trail can effortlessly break or break the sheet.
Recommend to read
THE BTR-T FROM THE TANK
Heavy APC based on the T-55 was first shown at the 2nd exhibition VTTV-97 in Omsk Developing a machine tailored to heavy urban fighting of the first Chechen campaign, Omsk KB transport...
RAILS ON THE TABLE…
For model railroad two rail strips are made from sheet aluminum. They need to be screwed to a wooden block. They mounted on the side bars of wood that make up the profile of the mound....