
Many of the works performed on the bench — not the table — associated with the need to check the dimensions. But in many cases far more convenient to do without these devices, it is only necessary to make the measuring instrument the table itself. Stick to the side of the tabletop ordinary tailoring “centimeter” as it is called in everyday life, using rubber glue or PVA emulsion, and can work much faster.
Recommend to read
THE BOOK “COLUMN”
If you perform construction industrial bookcases and shelves, you will notice that their depth is normally twice the width of the book. So the books have to put in two rows, and it is...
LIKE A GLOVE IN HAND
A simple device consisting of a Board with a cutout, makes it easy to remove the tight boots. To give the required level from the floor under the Board attached to a wooden block, and...