TABLE SHELF

TABLE SHELFBook required at the moment for work, must be always at hand; however, the folded stack on the table, they interfere, and use them uncomfortable. Make a simple table shelf, and you’ll forget the inconvenience. Missing parts not required: two cutting boards or sheet of chipboard and three wooden rod with a diameter of about 20 mm, located between the sidewalls so that the book relied on them. If necessary, these shelves can be made to chain the entire length of the table or even a small bookcase, if you put them on one another with a pin fixing side.

Recommend to read

  • A simple voltmeterA simple voltmeter
    measuring constant voltage value of 100 V. It is produced by the bridge circuit for the transistors T1 and T2. In one diagonal bridge included a measuring device in the other power...
  • AND AGAIN THE MOTORAND AGAIN THE MOTOR
    To drive in many modern pneumatic machines and tools required compressed air pressure of 3-4 ATM. Is it possible to build a mechanism which effectively would have used a pressure...