If you have a SLR camera and adapter rings, make a photocopy knizhnoi articles, magazine pages, or other reproductions not accounting for labor. However, the camera “Zenit-GP” with lens “Industar-50” for it is not very convenient: it is not easy to find him adapter rings with thread M39. 1, and make them very difficult. But, it turns out, to change the focal length of this device is possible without transition rings. Remove the lens and then unscrewing the four screws (3),— fpanel (1), on which the fastened to the vessel body (2). Turning the flange by the other side, again secure it in place with screws and screw in the lens. Now focal length will allow you to take pictures with 0.35 m, which is sufficient for reproduction. A. NIZOVTSEV
Recommend to read
SCREWED… WITH A DRILL
When my dad collected a wardrobe, had to tighten a lot of screws. We remember posted in the "Modeller-designer", the Council is to use in such operations as rotation. But we had the...
BEHIND THE WALL AND THE WARDROBE AND THE BED
Built-in furniture for country attic. As a rule, country attic (the so-called well-maintained loft happy owners shestietazhnyj plots) — the room is not too large, so that linen cupboard...
