
Anyone who had to work with a spray, and even a room, knows how harmful “for the respiratory system. Meanwhile, the problem of protection is not too complicated. We only need to create around the head painter area of clean air. This can be done using the same compressor or of a vacuum cleaner, which is used to operate the spray gun. To “that segment of rubber tubing, which is done by a lot of holes, sewn into a special vest made of thin tarpaulin. One end of the tube should be plugged, and the second is connected to the tee, and embedded the hose to the spray gun.
Now when the compressor around the head will create a kind of an air bell through which couples solvent, paint and dust not to break.
Recommend to read
HEADSETS HALLWAY
After a protracted and rather overhaul purchased the manor house, it was found that to check have not only a "bare walls", but with almost empty pockets. I think that in such a situation...
TWO AS ONE
If you have a few small flat brushes, and painting works took fleyts, you can do it yourself. Take two flat brushes, and connect them firmly clamped between two plates of plywood and...