SURVIVE INTERIOR LIGHT AND LAMP

Unfortunately, the real service life of bulbs and shades in lightly places their exploitation is often not as long lasting as I would like. Break the bullies, twisting the bottom-feeders of public (and, say, neutral) property. A lack of control and lack of adequate measures of protection to contribute.

Propose technical solution to improve the current situation. The essence of it — in fixing of the ceiling lamp little-known way. And from someone who wants to make the interior light and lamp longer served on the landing or, say, in the hallway of an apartment building, significant time, material and physical effort is not required.

However, you first have to mount (in front of one of the threaded cavities) to run the M3 hole. Him, after a preliminary and a tight screwing of the light, screw countersunk screw retainer. But at first, not until the end, and to leave on the glass ceiling at risk for later chipping or chipping of the recesses for the tip of the screw. Then the ceiling again to screw in the holder. Completely screwed and countersunk screw-retainer.

Hidden fixing dome to protect the lamp against unauthorized access:

1 — a ceiling; 2 — a cartridge with a bulb; 3 — countersunk screw-lock M3; 4 — holder; 5 — wall

Now neither the interior light nor the lamp quickly and invisibly (as it could be done once) can not be removed. Will take tool in hand and stand or ladder. In addition, the solution albeit a little secret (protection of the illumination device countersunk screw) to the uninitiated will have to spend some time…

And if the residents are alert, then a stranger, crawling at the lamp, be sure to pay attention and take appropriate measures.

V. ZELENOV