ELLIPSOGRAPH —
is the name of this simple device. It can be used to draw an ellipse with any ratio of the semiaxes. It is enough to set into the holes on the line of alignment pins to align the center of ellipsograph with the future centre of the ellipse and rotate the line by 360°. Parts of the device can be made of duralumin sheets, guides pins are made of steel.
Recommend to read
LIGHT CONTROLS THE DOOR
Device for automatically switching-off the lights in the bathroom (dressing) room are designed to seamlessly allow the following situations: 1. In the served room is unoccupied, the...
SEALANT – SKI-WAX
In the kitchen under the sink plastic drain from the knee all the time leaking water. Not only that I did: the gaskets were replaced, and wrapped the connections with electrical tape and...
