Su-26 — CORD POLYOPIA

Su-26 — CORD POLYOPIAElectrolet cord with external power supply. In recent years, Kostroma modelers electrics are the most popular. One of the latest developments of the laboratory of experimental design syut city of Kostroma — training cord model aircraft, which combines such qualities as good maneuverability, durability, adaptability, low cost, modern design, the possibility of manufacturing in technical circles and in the classroom work in secondary schools.

Read more

AND A JIGSAW AND A DRILL

AND A JIGSAW AND A DRILLAll the details of this wooden truck, so the tools for the job need simple: kicks jigsaw, drill, sandpaper, files. The frame consists of two strips of a cross section of 25X36 mm and a length of 640 mm. Transverse elements: a round wooden rod with a diameter of 25 mm (front), plywood plate 75X160 mm thick of 6 mm (bottom cab) and box rear axle, assembled with glue n small studs made of plywood with a thickness of 5-6 mm. At the rear of the frame in the middle of the drilled hole 12 mm in diameter — one for the axis of the body, and the other for the main winch of the lift.

Read more

BATHHOUSE IN CAMP

THE BATHHOUSE AT RESTNot going to tell you about what is a fascinating (though difficult) kind of leisure — Hiking. However, after a long and sometimes multi-day transition fatigue accumulates in the muscle and sweat and dirt on the body. In the heat you can bathe and relax in the river, lake or stream. In the same cool weather without a bath is not enough.

Read more

YOUR BEST SCREW

YOUR BEST SCREWYOUR BEST SCREWUnfortunately, experience manufacturing propellers for the Amateur designs with rare exceptions not worth repeating. And perhaps the main cause of failures in the inconsistency of the parameters of the propeller with the engine performance. Often Amateur designers create too “heavy” in the wind against the propellers, causing the engine not developing full power and thrust is insufficient.

Read more

CRAB: A COLLAPSIBLE BOAT

THE CRAB: A COLLAPSIBLE BOATThe proposed design is a four-section, three-man boat with load capacity of 320 kg In tourist trips she, being dragged to the Bank, turns in a fairly spacious “tent”, especially if you throw on top of a piece of plastic film. The boat is so simple that it can make even a person unfamiliar with shipbuilding and have only basic skills working with wood. To manufacture do not need special equipment and space, the whole boat is going in the room of a city apartment. It is made from widely available materials that can be Purchased in stores construction And household goods. The cost is Approximately 20-30 rubles (in passing it should be noted that for the registration of boats is necessary to keep all checks and receipts).

Read more