A concept snowmobile with an enclosed cockpit developed by Polish designer MikaL Bonkowski. This development aims to increase the comfort of the snowmobile and to protect the driver from snow and wind. Cabin with large glass area provide excellent visibility, and to improve handling of the snowmobile will receive the adjustable skids. A couple of the tracks are driven by powerful electric motors, and each of them can be controlled separately, thereby greatly enhancing the maneuverability.
COMFORTABLE SNOWMOBILE
Modern mansions of wall solid concrete or stone deaf fences, and the usual plots, usually surrounded by a light net or stamenkovi fences.
The beginning of a new period in the development of Italian fighter aircraft was the development of the company FIAT in 1936, the plane of the monoplane FIAT G. 50. The fact that Italy has long relied on fighter-biplanes, an ardent supporter of which was the chief designer of FIAT H. Rosatelli. The creation of the G. 50 monoplane associated with the advent of the firm young engineer G. Gabrielli, bringing with him many new ideas different from conservative supporters of fighters-biplanes.
His appearance in the editorial was met with a, frankly, no enthusiasm; preliminary telephone conversation were no signs, it seemed, nothing sverhinteresnogo. Homemade paper? Well, someone today, they will be able to inspire! It’s long passed stage — paper model…
Electrolet cord with external power supply. In recent years, Kostroma modelers electrics are the most popular. One of the latest developments of the laboratory of experimental design syut city of Kostroma — training cord model aircraft, which combines such qualities as good maneuverability, durability, adaptability, low cost, modern design, the possibility of manufacturing in technical circles and in the classroom work in secondary schools.
Fans of audio and video tapes, cassettes and discs accumulate very quickly, and if at the beginning of their stack, not hinder, over time they turn into a whole heap of crumbling, falling, and “dig” needs is becoming increasingly difficult.
All the details of this wooden truck, so the tools for the job need simple: kicks jigsaw, drill, sandpaper, files. The frame consists of two strips of a cross section of 25X36 mm and a length of 640 mm. Transverse elements: a round wooden rod with a diameter of 25 mm (front), plywood plate 75X160 mm thick of 6 mm (bottom cab) and box rear axle, assembled with glue n small studs made of plywood with a thickness of 5-6 mm. At the rear of the frame in the middle of the drilled hole 12 mm in diameter — one for the axis of the body, and the other for the main winch of the lift.
Not going to tell you about what is a fascinating (though difficult) kind of leisure — Hiking. However, after a long and sometimes multi-day transition fatigue accumulates in the muscle and sweat and dirt on the body. In the heat you can bathe and relax in the river, lake or stream. In the same cool weather without a bath is not enough.