It happens that the house accumulates a large amount of glass bottles of colored glass, unusual and beautiful in form that it is a pity to throw away. Such containers can serve as prompts to publish in the journal “Earmaster” (Hungary), the main material for the “production”… the original glasses. As a tool used homemade box-cutter. To work you will also need epoxy glue, and in addition different grit abrasive paper.
Yes, it’s probably easier to not think. For the manufacture of such “Firefly” will need only a flat battery, the light bulb is 3.5 V and the two rubber rings or a bit of adhesive tape. Assembly of flashlight I is strengthening at the short contact plate batteries the base of the bulb so that Read more…
Photo these aeroamphibious — archive edition. They, along with some technical characteristics of the machines, sent some time ago, Vladimir Pichugin from Kizel, Perm region.
To quickly dry the washed linen, the hostess usually hung out on the balcony: comfortable but not very aesthetically pleasing. However, drying underwear will not be visible from the outside, if you make him a simple “hanger” is attached to the fence rail with hooks to which to attach the loop ends of the ropes.
When the faucet suddenly begins to run cloudy or rusty water, and a filter for cleaning the house is not then so off the cuff can be manufactured from readily available materials, probably available in every home medicine Cabinet.
However. it is intended not only for the grandmothers, for everyone who loves to knit and is constantly “at war” with fleeing like a mischievous kitten, a ball of string. Fasten it to my wrist with such “decorations” — n tie even on the go: the ball will always be at hand, literally and figuratively. Read more…
Before proceeding to the description of the snowmobile “Turtle-2”, will tell about the history of his birth. And it happened thanks to the ATV — the predecessor of the same name, only with index “1”.
Each constructor of RC models knows how many times spent the time to draw a wiring diagram. In a hurry is not always possible to sustain the necessary proportions between the individual elements, thoroughly implement the conventions. And then this scheme is not only messy, unsightly, but it often creep annoying bugs and inaccuracies. What to do in this case? To help here you can the cliches. More precisely, a set of moulds from which to select the desired image of the scheme. There are only about twenty: resistor, capacitor, diode, transistor, transformer, etc.
Fluorescent light (LDS) are widely used today in various industries and in everyday life. Unfortunately, the durability of LDS is extremely low. Their weak spot — helix required for the ignition of the phosphor inside the lamp at the time of inclusion. Two of them — from both ends of the lamp, and if even one of them burn out, to include LDS with the standard circuit (containing inductor, capacitor and starter) is impossible. In such a situation it is necessary to change the blown bulb with a new one. Therefore, where there are a large number of lamps (for example, in manufacturing plants, apartment buildings, stairwells and other similar cases), during the years of operation goes down and accumulates a lot of LDS with blown spirals.
Elastic tape used to seal the cracks in the frames of Windows and doors, you may find a different use, if there is a need in the hinges for the lids of small boxes or caskets. Enough pieces of tape to attach, using nails with a wide hat to the body and the lid: when Read more…
