Advice

Have been published in the journal advice, how to repair vacuum cleaner hose with cut Velocimetry. But it does not work the necessary rigidity of the connection. To achieve it together with rubber I use a suitable diameter plastic bottle cut his whisk and fixed to the hose with a wire twist. Share and others Read more…

  A lot I am in my life have come up with different motorized tillage tool but without a shovel is still not enough. However, it had to be perfect — a stretch of tempi under the cottage I went to a swampy overgrown. The roots — a great deal. Stick this in the ground Read more…

I think many who have to work with small metal objects. will be useful to my “magnetic” finger, or rather — rubber fingerstall to which is glued a small square of a permanent magnet.

  Now fashion wooden buttons and decorations that require a large number of blanks-kruglyashi. Cut them from a wooden rod very easily with a hacksaw on metal, if you fix it is not one painting, as usual, but two or even three, as shown in the figure. Yu FEDCHUK, Lviv

If you have to paint the walls of the garden house, for the work will have to purchase several brushes with handles of various lengths. However, you can do one, if you make a handle the sliding, telescopic. Pick up a couple of duralumin tubes of suitable diameter, to a lesser secure the brush, and Read more…

We often say, referring of course her knife. There is nothing more painful than trying in that case, skip the meat, even ice cream. But it is easily corrected if is at hand with fine emery paper or abrasive block. In a circular motion while pressing it lightly drag on the knife, and then grate Read more…

Night little children, tossing and turning, dropping the blanket and from the cooling often catch colds. Parents have to Wake up and see not revealed whether the baby. Meanwhile, it is easy to make a blanket raspolzayas. Enough to the corners to sew underwear elastic segments, the ends of which are slightly pulling, attach to Read more…

Qualitatively the condition blunt piece of iron of a plane is not easy even for an experienced wizard. Especially manually. As anyone tried, but to preserve the desired sharpening angle thus practically impossible. Another thing, if you use any device. For example, a wooden plank with a sloping cut. The width and thickness of cut Read more…