Advice

Its really easy to bend the tin, and even better — from a thin sheet of colored metal, but of course not for sending by post.   Make at the top, not a bent valve, the opening and hang the envelope on such stud and the wall next to the table, which prepare lessons. He Read more…

That usually takes home the wizard when you need to saw off the bar or the Board? Most often, kitchen stool, judging by the scars left on it by the saw. Meanwhile, it is easy to make from two small plywood or particle boards simple trestles. Two vertical fins are connected with hinges, and the Read more…

We all know that when watering garden plants water shall be sprayed. For these purposes it is possible to manufacture the nozzle on the hose from the segment of steel pipe of suitable diameter. First billet from one end should be flattened, and then a hacksaw to make here is a keyhole that will allow Read more…

When the movement of a flickering candle flame is easily extinguished, even if it is diligently protecting hand. More safety — glass jar, but it is hard to set a lighted candle; in addition, the glass may crack, which is unsafe. It is better to do in this case is a kind of lantern out Read more…

Lovers of flowers and gardeners is often necessary to mark the plants or seedlings, not to forget where what was sown-planted. Such tag-number plates can be cut from the modern packages of milk or juice. And more durable would be like a harvesting of white plastic bottles.

Hanging on a nail the picture or mirror will make a mistake with the calculation of the length of the rope loop: it would be necessary to tighten or release, and everything is tied. In this case, help out a small plate with three holes. It can be made of metal, plywood, plastics — depending Read more…

There are various designs of towel racks in the kitchen or Kanna and. One of them is a vertical series of levers, threaded plastic end caps on the rod of the bracket, screwed to the wall. From the hanger or on the CE principle can be made comfortable stacked microscopici for small parts — studs, Read more…

The spokes of the wheels of many bikes have the same diameter and the threads on the end, for example, “Ural”, “Kama”, “Salute”, “Student”, “Levushka”, and others. However, the length of the spokes, almost all different, and Ural’s needles are the longest, and therefore a few pieces from him that I keep in reserve. In Read more…

When working with a rotating cutting tool it is recommended to use special protective glasses. Their role can play a makeshift shield-the intake is made of metal strips and thin sheets of Plexiglas.