Advice

There are situations when an urgent need to move light but large-size material: chipboard, sheet glass, hardboard or plywood, and at this time there. In this case, the rescue of suitable length cut “endless” rope (with tied ends). The sheet material should be placed on the longest edge and under the edges to make a Read more…

To drill the axial bore of small diameter into a long cylindrical part is not so easy even on the machine — drill was almost certainly “will lead”. To gain maybe a simple jig made from a block of aluminium, plastic or solid wood thickness of 15 — 20mm Through hole of the desired diameter Read more…

The gaps between the doors or door leaf and the jamb cover strip, typically of the rack, attaching it with the overlap to the free edge of the door. If the rail is narrow, it is poorly kept. If wide, it looks ugly. Head fasteners too difficult to hide. Better batten to make moldings, t-section Read more…

Fans decorative fretwork jigsaw know: saws, fragile, broken — will not save enough! However, why not stock up? Not only by the saws, and a simple fixture to make them. The originality and accessibility of this method lies in the fact that the nail file is made of a die used to bore the thread Read more…

Now, almost everywhere applied electronic machines and appliances, the programme of work which is carried out by using perforated paper tapes and cards. Therefore, it is easy from already used punch cards to pick up where the holes were located in one row. Essentially, this is a ready device for drawing dashes: apply to the Read more…

So it is sometimes: you need something urgently to paint or draw, label, and doesn’t brush. Rescue method, which is applicable for manufacturing of any brush set. This will require a tube of suitable diameter, strong string or wire and any fibrous material — fur, synthetic yarns, tow, or wool. The Assembly is clear from Read more…

The first enemy records — dust: invisible to the eye, it becomes “audible” as soon as the needle touches the disc player, particularly a high level. Crackles, rales, crepitation, in this case, the typical noise design. In addition to the regular wiping of the disc with a soft cloth, install the cartridge a sort of Read more…

Used by dressmakers for ripping the old seams convenient rezachek in the form of a two-pronged fork with a sharpened inner edges will serve to raskryvanie sheet soft plastics, as shown in the figure.

To connect the motor shaft with the driven shaft in the mechanism is never easy. For example, electromotor and water pump also require accommodation on a single rigid frame, which would provide the ability for strict alignment and shaft alignment. However, all this is hard. Much preferable to the “soft” option — via a flexible Read more…