Offer two wall-mounted design magazines for kitchen knives. The first consists of two wooden foils with a cut in one of them Windows. If you need to clean the grooves is sufficient to Unscrew the screws. The second area of aluminum with cuts at 45° relative to the edges of the shelves mounted on the Read more…
It is useless to try to saw off the screw with a hacksaw: broken thread, the nut cannot be screwed on the warped teeth first turns. But the same operation will be quite successful if you screwed the nut on the screw: then at screwing its threads, the threads will be straightened.
…An urgent need to record the address, name or telephone number, and, as luck would have it, no piece of paper. If you charge a roll of paper here in a homemade box, this problem will not occur for at least as long as you s will written out the whole roll. Details Desk telephone Read more…
…it is possible to make a device for determining the marks in the construction of garden buildings. For this you will need a long hose with transparent bits filled with water.
…and then you don’t have to throw away empty plastic bottles of detergents. The tip of the bottle into a convenient funnel, the lower part will put on the table is a glass for ka-Rand-necks or wrists. If you insert the funnel into the glass, you get a flower-pot. It is only necessary to seal Read more…
Many Housewives, especially beginners, are recipes for various dishes listed in the cookbook. So she was before my eyes, and not lying on the cutting table among the products, you can make a hinged shelf for books, fastened to the lower surface of the wall locker.
Screwed metal area with a rubber Mat to the table top washing and chopping kitchen table, it is possible to eliminate a gap between a wall and furniture.
To create new year’s mood does not necessarily set the house a big tree. Moscow designer Marina Vinogradova offers its miniature version: it made their hands soft food foil layers strung on a Chinese chopstick or kitchen skewer. This silver Christmas tree it will decorate the holiday table.
While working on podmostjah you need a hammer — you have to go after him, and after? Again to descend, to put in place. But soon he again had to jump back and forth, attach to the side of the trestle bracket under the instrument — and it will always be at hand.
Amateur constructors of boats, yachts, cars often face the problem: how to get the curve on the big plane? Enough to install on a building berth vertical panel, the edges of which drive a couple of nails — that’s all in the preparation. Nails freely hung a fine chain or a soft wire: proviso, they Read more…
