When making thumbnails or sports models boats and ships, from small sailboats and light to heavy and huge battleships — be sure to take models of such elements of the mooring devices, as tilting the slats or cleats, and not in a single number. But because in the simulation it makes sense to think about technology as a “serial” production.
START CORD
To run a series motor without special work can the Modeler of any skill level; not the high-speed engines. Because of the wide valve timing they sometimes play up all the short time allotted for training to start. That is why athletes try to use the starter, a mechanical device for the rotation shaft of the engine at startup.
THE HELICOPTER… ON THE CONTRARY
Berth — strange, strange-looking ship, like a flat, sprawling in the width and length of the bus. We’ve finished boarding, the passengers took their seats, already given to the mooring and ship-bus, slowly perfecting the engine, away from the pier. The engine noise increased, the water around the hull bubbled hundreds of underwater keys and then…A BALL ON A LEASH
Those who knit, know the ball, like a mischievous kitten, constantly tries to “jump” to Copen or pop out of a box or package while working and rolled somewhere under the furniture. It is also difficult to use wound in a similar way with twine, cord, rope. To “tame” them will help any funnel of Read more…
BLASTER AQUANAUT
About ten years ago I read in “M-To” article that described the design of the spear gun. Decided using the same principle — a spring as a battery, to make the gun more simple, easy, and good combat. Numerous experiments and fine-tuning have produced the desired result.MILL ON THE FARMSTEAD
Those who contain in the household livestock and poultry without grain reserves is not enough. Grain can be stored for a long time (in one of the magazines I read that in the tomb of a Pharaoh found the amphora with the wheat seeds were such that even wiseway). But that grain use for animal feed with greater benefit, must be pre-ground or at least crushed. But the grind, even large ones, unfortunately, under normal conditions for a long time can not be stored with it and the quality loses, and’t go rancid, and it infest some bugs, worms. So grinding is necessary in small amounts, and therefore quite often.“SPEED” BOLT
Not only fitter or installer, but any technician knows to connect the two parts with the bolt, insert it through the hole, then throw the washer and finally screw and tighten the nut. As you can see, thus there is a double work: there is not only the Assembly of parts but also the Assembly of the bolt.ASSORTED TO BASKET
Lightweight and durable it turns out tuesok of birch solid “pipes”, accurately taken with an older birch deck. It is good to walk with him in the forest for berries and mushrooms. However, forest products fall out of sync, and I want to collect both. Not to blame everything in one pile, make a partition, Read more…
UNLOADS THE AIR…
A considerable amount of manual labor required unloading bulk materials from open railway platforms. They increase especially in the off-season, when the materials can regedit. This leads to complex and costly discharge, and often to excess downtime rolling stock.“WELL, HARE, WAIT!”
With all the abundance of modern toys for children from a variety of soft to various Electromechanical and even RC — the kids are still popular favorite, and the simplest, especially if they can be transported by a rope. Among the latter, preference will be given to those that are in motion have their own dynamics: spinning, swinging, waving, or jumping.