Party NTTM, army innovator Y. Bandurko, suggested a simple device for cutting steel wire rope. Steel is the base plate to which are welded crosswise arranged vertical edge guides. Between them with the edge of the knife upwards to fit the bar, he lowered the rope, and the top plate is inserted into the mandrel. Then all of this fixture Assembly is installed under the press, the mandrel takes its stress on itself and presses on the rope, cutting it on the blade of the knife block.
ROLL ON THE PEDESTAL
Every housewife in the kitchen Arsenal are the rolls of napkin paper or foil. But to use them and store them without special tools is not very convenient. Make a simple stand — and you will forget about these inconveniences. It consists of a wooden base, sawn from any of the Board, and of a Read more…
GAS — ELEKTRO AS
It would seem that not so long ago appeared in our kitchens “blue light” — the first of the Saratov gas. The enthusiasm that accompanied the displacement of them wood-burning stoves, kerosene stoves and kerosene stoves, over time, subsided. Gas was not an ideal fuel for stoves. The allocation during the combustion of harmful substances, the constant danger — and suddenly blow out the flames the wind and the room is filled with explosive mixture, — all this has led to the fact that gas stoves were gradually superseded by electric. The advantages of the latter compensate for even that heat the burner costs a bit more expensive.SHOP STRESS
To debug transistor-based hardware is much easier if you have the regular store stable voltages. Two adjacent shoulders of the bridge rectifier V1, V2 connect the unit Zener diodes V3 — V8 and V9—V14, V15 — V20, V21 —V26 or V27 — V32 (Fig. 1) exercising, in addition to rectifying the current, stabilization of the output voltage 7, 8, 9, 10, 12, 14, 16, 18, 20 or 24 V at a current of 30 mA. When the input voltage is within 110 — 240V output changes by 0.2 V and the current is 1 mA.SOLDERING IN THE ROLE OF MARTIN
This advice will be useful to those involved in the drinking of low-melting materials. Take a spare soldering tip high power (over 65 watts), flatten the end and rivet it to a steel stamped Cup — for example, the wheel cover of a stroller or a spoon of suitable shape. Align the hole in the Read more…
IN THE SKY — “ALBATROSS”

To create a device is simple, inexpensive to perform and at the same time with high performance — such is the aim of gliders. We offer our readers the description is very promising glider “Albatros” open class, created by Moscow engineer A. Z. by rabanim in early 1978. This device has been widely tested and has a high aerodynamic qualities. From other phones open class “Albatross” stands simple design (all tube frame straight), in combination with precise profiling of the dome, which provides pre-curved armor combined type (front — hard, back — elastic). The frame of the Albatross allows you to apply domes of different shapes and size without any alterations and additional adjustments.Cup HOLDER? IT IS NOT NEEDED!
His appearance holder, obviously, was due to the fact that it was not possible to attach the handle to the glass. Modern chemistry allows you to do this even at home. Take the glue BF-2 or “Moment”, and of metal strips vignette the handle In the part that will fit the glass and drill a Read more…
CAR FROM MOSCOW
The Renault Logan sedan of the company “Avtoframos”. If in your childhood you received a gift of a real soccer ball or, say, skibord, you will probably understand my feelings when I suddenly found myself the owner of a Renault Logan—car French origin, and in the Moscow production.
THE MAGNETIC FIELD IS A SATELLITE OF THE CURRENT
Remember, what is the simplest electrical circuit? The galvanic battery and light bulb connected by conductors through the switch (see the article “Ohm’s law” in the “M-K” N2 9, 1978). If such a circuit connection line length of about 30 cm to bring a compass, its magnetic needle will tend to become perpendicular to the conductor (Fig. 1).JEWELLERY WITH THEIR HANDS
During archaeological excavations of ancient burial mounds and graves along with different kinds of jewelry in many meet the beautiful decorations, made of copper. Try your hand in the manufacture of such jewellery available to everyone — you just use a copper wire and a simple improvised devices, prompted by the Hungarian magazine “Earmaster”.









