He is still a pilot. Because I do not imagine myself without the sky. However, today the pilot He doesn’t goes up to the sky at the controls of an aircraft in the air it shoots miniature rockets, to which Vladimir Menshikov put your love to the sky, the pursuit of excellence. It was here that he realizes what gave him the aircraft.ROCKET PLANE PILOT MENSHIKOV
He is still a pilot. Because I do not imagine myself without the sky. However, today the pilot He doesn’t goes up to the sky at the controls of an aircraft in the air it shoots miniature rockets, to which Vladimir Menshikov put your love to the sky, the pursuit of excellence. It was here that he realizes what gave him the aircraft.
Fights over Zaragoza and Wescoe. With the aim of weakening the Franco offensive on the Northern front, the Republican command has taken a series of diversionary strikes in the region of Zaragoza and Huesca.
Radio, powerful or low-powered — the Fox, which is so earnestly looking for “hunters” at the event. Low-power transmitters on one of the high-frequency transistor of the type ГТ308, П416. They are used for training, demonstrations, and to tune receivers. Diagram of such a transmitter operating in the range of 3.5— 3.65 MHz, — figure 1.
Once his hands were wound transformer coils, he knows how difficult, unproductive and laborious this work. It is necessary not only to carefully, turn to turn, put the wire on the frame, but do it with the necessary — is the same for all coil — tension and not make a mistake when counting turns.
For the manufacture of tracks required plywood thickness of 10 mm, and it is important that it was dry, smooth, uniform thickness and without lagging layers. Each sheet should have the dimensions 1500×1500 mm. If this condition is not met, installation of the alignment and connection of individual components is greatly difficult. Straight sections are cut on a “circular saw” along the cross-section of the fiber, and then butt and trimmed. The finished strip should be sized 1500×480 mm. For Assembly of straight sections of the route will require 27 partitions of size 480×1500 mm and 4 mm. in size 480×800
Readers of “M-K” have already had the opportunity to meet with a student design Bureau Mari Polytechnic Institute (see No. 8, 1977). This team is many years engaged in the original design of snowmobiles, including many snowmobiles amphibians. During the time elapsed after the publication at SKB have developed two more such machines.
Start with a careful study of the drawing and then get to work. As the present motor vessel, the vessel is stacked On a smooth plywood, 3 mm thick, transfer the exact dimensions of the deck and frames using carbon paper or tracing paper. Remember that on the deck of the elephant of plywood will be parallel to the axis, and the ribs vertically.
