MODEL CONSTRUCTION

WAS THE DRILL-WAS THE PUNCH

25.05.201813.05.2018Good recommendations

Very often, a broken drill should just throw it away because of the inability to even re-ground it. However, it can be converted into a punch. It is enough to the breaking point to make the angle marked in the figure. For such an operation better suited for the drill of large diameter. This punch Read more…

THE LAST CAR OF THE LEADER

25.05.201813.05.2018Auto show

Executive cars, leading descended from the Royal gilded carriage ride with the “power plant” of about a dozen horses in harness, appeared at the beginning of the XX century. And they have become quite reliable and safe -the monarchs, the highest state officials, as well as “owners of factories, Newspapers, steamships” the race began to order entered suddenly in Vogue cars-limousines.

THE HEAT IN THE HOUSE

25.05.201813.05.2018Himself an electrician

If you want to have in the house and other buildings efficient heating and cleanliness, you can always use the electric-powered three-phase network with voltage of 380 V, both independently and in conjunction with a boiler for solid or liquid fuel.

SCRUBBING FLOORS, WITHOUT A BUCKET

25.05.201813.05.2018Good recommendations

To clean very dirty floors in commercial premises or to refresh a larger area, including the site with asphalt or tile floors, a country or a plot, will allow that such scrubber brush. From traditional it is characterized in that as cutting a pipe (plastic or metal), which through a flexible hose connected to the Read more…

RESCUE SKIN

25.05.201813.05.2018Good recommendations

It happens that the cover have not used the bottle or vial does not want to otsenivaetsya, as if glued. These, by the way, happens Vice versa and with a fresh, not yet opened glass or plastic bottle, having a screw cap with retaining its annular shoulder on the spout, which when opened should come Read more…

THE FIRST AND EASIEST SNOWMOBILE

25.05.201813.05.2018Design

The snowmobile, which, the story goes, collected the tenth-grader Sergey Sorokin from the Altai village of Ust-Kamenka. This is not surprising. Equipment guy is fond of since childhood – for eight years, he has been in the CCC (children’s creativity Center) to the circle of “Small appliances”. In a compilation of drawings and design layout and transmission schemes of machine assisted group leader Viktor Aleksandrovich Kurbatov. Responsible welding works helped to run his father – Boris Andreevich. Everything else until the processing of parts on machine tools, has fulfilled himself. In total, Sergei built a snowmobile for about a year, the Assembly took almost four months, from autumn to spring. And until the snow melted, I managed it only to test, “Ispahan” everything drifts around the house. But now revealed some shortcomings, which for the next season is going to be eliminated.

TUBE WITH CAP

25.05.201813.05.2018Country house

The owners of the houses with stove heating know how difficult it is to melt the cooled furnace (fireplace or heater), especially in rainy windy weather. Will pay in the truest sense because the smoke at first is often not the pipe, but rather into the room. This problem is especially relevant for those owners of garden and country houses, which are frequented there in the cold season only as needed.

Out in the presence of electricity with the help of vacuum cleaner and cut the curved steel pipe of suitable length and diameter, which must be installed inside the trunk of the chimney with the release of its lower end through the wall, as shown in the figure. When emptying a vacuum cleaner at the top of the pipe of the air flow outside, will create a vacuum and thereby increase traction.

THREE-IN-ONE

25.05.201813.05.2018Good recommendations

Mix epoxy resin with hardener is used as not only self-hardening compound or filler, but also a universal glue. If in the preparation of the mixture, add to the oil paint, it freezes faster and lasts longer. P. RISK, G. Polyarnye Zori, Murmansk region

SEMI-AUTOMATIC WELDING

25.05.201813.05.2018Small-scale mechanization

Sure: compact welding machine (ESPA), the merit of which is guaranteed by the protective electronics and the environment carbon dioxide, in any sector will not be superfluous, Especially in the repair of the lining of the machinery or of the vehicle, as well as carrying out permanent joints of thin (for example, aluminum or steel) sheet, when to avoid burn-through area of the heating of the metal should be minimal, but not to the detriment of the quality of the weld.

IT IS A PRACTICAL

25.05.201813.05.2018Own hands

Strict, rigid form of objects that surround us, evoke nostalgic memories of old times, when mass production did not exist, and each a “serial” product was manufactured individually, based on the technical capabilities of the manufacturer.

This equally applies to objects and houses. For example, you can try to change the long hallway of the apartment. This arranged lightweight partition wall with door passage in the form of an arch, leading to the formation of another room.