Many Housewives often want to change the layout of his apartment. Now building new buildings to fulfill this desire is quite real: the architects of advance lay in their projects the possibility of alterations at the discretion of the beneficiaries. However, it is not difficult to do in older homes, as in most of them the internal partitions are not load-bearing and light from a thin-walled panel or gypsum blocks. To perform such work is not difficult – more difficult to get them accepted in the relevant regional interdepartmental or architectural organizations. Their expert Committee should confirm that your dream, for example, to go from the kitchen to the dining room, not through the corridor, and after you have done separating them, the wall of the arch will not violate the requirements of applicable building, sanitary and technical and operational regulations for residential buildings.
SEPTUM TO MOVE? EASY!
This slogan was the basis of the life and work of one of the founders of Russian space engineer Friedrich Arturovich Tsander, who developed the 20-ies of the last century one of the first projects of the spacecraft for flight to Mars. However, he was not only a dreamer — in the early 30-ies took an active part in the development of the first domestic liquid-propellant rocket engines and rockets in the famous gird.
At the time I had a chance to build and test many motor boats. The first water I came off the boat “star”, the drawings of which were published in the October issue of the journal “modelist-Konstruktor” for 1966. It is known that the village of homebrew not spoiled by the wide range of structural materials. What was required for the construction of the “Stars” for a long time was not. Had to make do with what was in the moment at hand, namely, a steel sheet with a thickness of 1.8 mm. Naturally, the power set of metal profiles and strips of different cross sections, coupled with sigouney paneling gave the boat a pretty solid mass.
Specialized in aeromodelling magazines increasingly published articles about the model aircraft with electric. Today betrothe quite successfully fly and kordovye, and Svobodnaya, and RC models. The reasons are many, and one of the main can rightly be considered the appearance on the market of light and powerful power sources and motors, a compact and lightweight remote control equipment.
GAZ-AA: FROM THE TRUCK TO THE BUS. A family of GAZ-AA GAZ-MM. The need for mass polutoratonny car originated in the Soviet Union in the late 1920-ies in the country to build new factories, canals, roads and power plants, and exercise is no simple, reliable and repairable cars was simply unthinkable. The construction site of the automobile giant was chosen Nizhniy Novgorod, has qualified personnel, well-developed transport network, and powerful Metalworking industry.
For lighting your desktop in many the approach is simple: that would screw me a light bulb more powerful. As a result, the “no cause” blurred vision, development of visual fatigue, drop in performance, the emergence of signs of sitophobia (photophobia). And it never occurred to us malaekahana that to create the proper lighting comfort long-established mass production of various lamps with adjustable brightness, among which the worthy place is occupied, in particular, sconces and floor lamps with built in dimmer switches.
Early furniture has served its owners for quite some time, sometimes even several generations. But in our time it quickly becomes outdated morally — design or design. And then this furniture can be a field for experimentation and prudent master, and a novice homebrew. Here they can test their design and engineering skills, but also to give old furniture new life.This “old faithful” and I had — tricuspid wardrobe Cabinet with mezzanines. It panels the walls were made of “refined” particle Board, but the front side doors very solidly trimmed bright polished veneer.
In the household from time to time there is a need for longitudinal sawing long boards on the bars or slats, trim, particle Board (chipboard) size or production of similar transactions with other similar building or furniture materials. Who performed such work with a hand saw, he knows how it is tedious, and difficult job, especially when such cuts necessary to make a few or have to work with wood, or cut the old particle Board with a lacquer finish, which stiffened the binder, and the coating is vitrified.