Room models of small size. Simple in design and in manufacture. Material for their construction can serve as dry stubble and any weed, its structure is similar to a stalk of wheat. As the adhesive used enamel or plain nail Polish. Of tools enough to have scissors, pliers and a razor blade from a safety razor.FLYING AROUND THE ROOM
Room models of small size. Simple in design and in manufacture. Material for their construction can serve as dry stubble and any weed, its structure is similar to a stalk of wheat. As the adhesive used enamel or plain nail Polish. Of tools enough to have scissors, pliers and a razor blade from a safety razor.
The Rover, shown in the photo, the original was made in a caterpillar form, and then converted into a four-wheel drive wheel, which for many years is in operation. Each of the six wheels, the front pair of which is driven, has an independent suspension. Wheels — tyres low-pressure chambers wheels tractor truck with a longitudinal brace and the transverse belts of the conveyor belt.
Ultralight Dinghy international class “Moth” “the Moth” (Fig. 1, 2) simple in design, convenient in construction and possesses all the essential qualities of sports ships – fast, maneuverable and sensitive to control. All this allows to recommend it as the first sport of sailing to those who wants to achieve in sailing Olympic heights.
What is usually stored in the pantry a good host, enthusiastically engaged in cultivating and farming vegetable crops? As a rule, a large set of various tools, among which the most common shovel, hoe, rakes, hand cultivators, weed control, and other similar accessories simple assistants to facilitate the work and help to grow a good crop of vegetables and different varieties of greens. To deliver a similar Arsenal to the garden beds and planting is required to have truck.
In one of the first projects to be protected, incidentally, by the copyright certificate № 347232, has already been laid all the highlights of the design, which is meant today by the word “cacolet”. Here was envisaged and case-polymac, and is spaced from the center of mass of the motor, and pendulum the scheme of movement of the Cabinet. Reducible to the scheme-section (Fig. 1) clearly presented the main elements and components of this transport device.
Conduct year-round training, not only without… ice, but even without skates allow trainers to skaters, designed by sports fans.
No welding or modern technological methods of joining metal surfaces with a laser or super glue — not supplanted the old, but not aging method: solder. And it is promising new products, many originate from the participants NTTM, young innovators.
Mini-recumbent, about which speech will go, was born in the Kazan Studio of Edward Stovbunenko — designer of velomobiles and a lover of travel to them. Edward party festivals, parades velomobiles “Golden ring” organized by Moscow club of enthusiasts biotransport (CAB) twenty years ago. Since then, he’s on different models with a muscular drive of his own, passed under the Russian and foreign roads the way, almost equal to the equator of the Earth.
In the design of the transmission of a snowmobile “Buran” has a centrifugal accelerator, the CVT. During intensive operation of the snowmobile this node will wear out within two seasons. First fail the movable cone of the variator and Cams-weights. The reason for such a rapid wear of the mentioned parts is quite simple: the Cams abut in the troughs of the movable cone, thus squeezing out deep dents. When starting the snowmobile from the place when the engine begins to develop momentum, the Cams are unable to smoothly get out of these depressions, there is a sharp jerk of the belt variator, which leads, among other things, and rapid wear of the belt. In short, almost every season you have to change the movable cone, centrifugal accelerator and a belt.