About the miracles did not suspect in a small garden cooperative near Bryansk. We gardeners in mind one thing: get the water from wells. In the heat of all able-bodied people are chained down to heavy handles cast iron pumps. Need to download bucket after bucket to water the thirsty seedlings.A PUMP CONNECTED TO THE SUN
About the miracles did not suspect in a small garden cooperative near Bryansk. We gardeners in mind one thing: get the water from wells. In the heat of all able-bodied people are chained down to heavy handles cast iron pumps. Need to download bucket after bucket to water the thirsty seedlings.
Somehow caught us a description of the six-wheeled Rover “Giger”. The main nodes it was very simple. Absent transmission, driveshaft, rear axle — these, in General, quite complex and heavy assemblies. Small engines — separately for the left and right sides through a V-belt CVT transmit torque with its series of wheels connected by a chain. The supports of the axes of pneumococcal rigidly attached to the body and turns was carried out by adding the engine speed on one side and reduce the speed of the other.
This car was designed (if one can call the process of thinking about design and estimates of size) and made for several hours after my brother and I received a message from his father from the village with a request to help him make his entrance to the house. It was clear that a stretcher we cannot do the work expected is significant, and any mechanized commercial vehicles was not expected.
Many people, especially those who live in rural areas, had to build, and those who had, perhaps still have, because man by nature loves to build is not only a necessity but a pleasure from the creative process. Here if it would be possible to mechanize here is a time-consuming work…
The car, which will be discussed, began to make acquaintance of mine in the late 1980s, when the automotive abundance was not far off, but we did not yet know. However, as soon as he made the frame with pendants, the enthusiasm waned; I had to continue the construction of the car to me. Having estimated the possibilities, I decided to take this job, especially because experiences in such a case I had earlier today I have restored practically from scrap “Moskvich-401”.
In the circle model airplanes syut city of INTA has designed an electric starter for starting resinator indoor models. He performed well at the national competition at the indoor model airplanes among schoolchildren of the Komi ASSR.
To limit flight free-flying models are often used machines with wicks. The thread connects the hooks of the fuselage and the stabilizer, locking them in the position required for the flight model. Wick, burning, burn through the thread and releases the stabilizer.
From January of 1976 in our country came into force new rules for rocketmodeler sport. The editors asked me to tell them the Chairman of the Committee on rocket modeling of the FAS of the USSR V. S. ROZHKOV.
Today we published drawings and a brief technical data model racing class 10 cm3, designed by master of sports Yuri Pankin — the numerous prize-winner of all-Union competition of avtomodelistov. Last year at the final competitions of the VI games of the peoples of the USSR, this desyatnikova has a top speed of 268 km/h.
In our reports on competition rocketmodeler mentioned category of rotochutes — S9. It is this category of model rockets are distinguished by the abundance of new products and interesting technical developments. It has been said and swept the blades of the main element of rotachute — rotor. Today we introduce our readers with the model class S9B A. gryazeva from Chelyabinsk.